ATTS RECIEVERS

OBS! Förordervara, leverans mars-april.

This Crystal Deluxe Receiver matches the striking looks of the Crystal ATTci Alarms offering excellent 360 degree visibilty.

• Crystal Deluxe Receivers feature an inbuilt stub aerial that gives the receiver substantially greater range.
• The unit uses 2 AA batteries for a longer working life. Incorporating 2 batteries also offers benefits in terms of increasing the range of the receiver over the original V2 units.
• The receiver has 10 independent channels and each channel can be programmed to a different tone output, that you can select from the 21 available pre-set tones. This is displayed on the 5 LED light array by means of a ‘solid’ latching LED that stays on for 30 seconds for the first 5 channels, and a flashing LED for the second five tuned channels.
• The unit has 5 preset volumes that are adjusted using the SSI (Silent Step Increment) system, controlled by the + and – buttons that are displayed on the corresponding LED.
• The Crystal Deluxe Receiver features a vibrate option (with or without sound) that automatically switches on when the receiver has been set on silent.
• Supplied with 7 colour lenses, with all the lens colours available separately for full customisation of LED colours to match your alarms.

Crystal Deluxe receivers fully compatible with all ATTs Alarms and V2 Transmitters – and future compatible with ATT products currently in development.

The V2 system includes a number of key features:

• Soft Touch, non-reflective, rubberised finish on Receiver and Transmitters.
• Improved Battery Life on Receiver and Transmitter – The Receiver is powered by a single AA Battery providing a battery life of up 3 weeks of normal use.
• The Transmitter is powered from a single GP11A battery lasting up to 1 season of normal use. The batteries supplied are tester batteries only.
• Mimics Alarm Beeps – The Receiver beeps at the same rate at which signals are received by the Transmitters, from the buzzer output, thereby sounding anything from a single bleep to a full-blown ‘one-toner’.
• Improved Range and Performance – tested to 100m + range under optimum bank side conditions.
• Multiple Tone Selection on the Receiver – 10 different user selectable tones.
• Improved Transmitter Design –The electronic circuitry is encased in its own watertight compartment to prevent the risk of water coming in, transmitter corrosion and any resultant malfunction.
• Activation on all LEDs (for simultaneous runs).
• Last LED Activation Recall.
• LED’s will remain on for 40 seconds after the last buzzer signal is received from the transmitter.
• Vibrate mode and Volume control.
• Low Battery Warning.
• Fully compatibility with the Deluxe Receiver.
• These systems are available with either 2.5mm or 3.5mm (for Delkim alarms) jack plugs.
• Standard system comes with Multi Coloured V2 receiver that has 5 different coloured LED’s – Red, White, Blue, Green and Orange.
• An ‘All Blue LED’ system is also available at the same price.

The ATT Deluxe receiver sets a new benchmark in wireless bite alarm system performance when combined with the ATTs Alarms or the ATTx transmitter systems.

• Deluxe Receivers feature an inbuilt stub aerial that gives the receiver substantially greater range.
• The unit uses 2 AA batteries for a longer working life. Incorporating 2 batteries also offers benefits in terms of increasing the range of the receiver over the original V2 units.
• The receiver has 10 independent channels and each channel can be programmed to a different tone output, that you can select from the 21 available pre-set tones. This is displayed on 5 LED light array by means of a ‘solid’ latching LED that stays on for 30 seconds for the first 5 channels, and a flashing LED for the second five tuned channels.
• The unit has 5 preset volumes that are adjusted using the SSI (Silent Step Increment) system, controlled by the + and – buttons that are displayed on the corresponding LED.
• The Deluxe receiver features a vibrate option (with or without sound) that automatically switches on when the receiver has been set on silent.
• Supplied with 7 colour lenses, with all the lens colours available separately for full customisation of LED colours to match your alarms.

All current Deluxe receivers are supplied with the latest firmware installation as standard, that means the receiver is faster reacting and offers optimum performance.

Deluxe receivers are fully compatible with all ATTs Alarms and V2 Transmitters – and future compatible with ATT products currently in development.

The Version 2 ATTx Receiver is compatible with V2ATTx Transmitters and all ATTs heads.

Key features of the V2 Receiver include:

• Soft Touch, non-reflective, rubberised finish.
• 5 independent channels.
• Adjustable tone control.
• Volume control.
• Vibrate Mode on/off.
• Excellent range (100m+ in ideal conditions).
• The V2 Receiver is sold with multi-coloured LEDs as standard. These LEDS are set in the following order: Red, Green, White, Orange and Blue.
• The V2 Receiver features a 30 second latching LED showing which alarm has bleeped/triggered.
• Single colour LED Receivers are also available. These include: all blue, red, purple, green, yellow and orange.
• The V2 ATTx receiver only requires a single AA battery (battery not included).
• This single battery will last up to 6 months of regular angling.
• To make sure that your receiver stays in tip top condition it is important to look after it and treat it with care.

To ensure the greatest reliability and longevity:

• Clean and thoroughly dry the item off before storing it in a dry place.
• We recommend keeping it somewhere warm (or at least stable temperatures) to avoid heating and cooling that may cause condensation.
• If you’re putting it away for extended periods of time we strongly recommend taking out the batteries. Battery leaks are not covered by the ATT warranty.